Synthetic Rubber Based Hot Melt Pressure Sensitive Adhesive Glue For Masking Paper Tape

Synthetic Rubber Based Hot Melt Pressure Sensitive Adhesive Glue For Masking Paper Tape

PRODUCT DESCRIPTION

This item is a synthetic rubber based hot melt pressure sensitive adhesive specifically developed for industrial tape applications.

The product is featured high tack and peel, high shear, no residuals after peeling-off, and good ageing performance.

SUGGESTED APPLICATION

The product is suitable for the industrial tape application, such as masking tapes, Other industrial tape applications that high bond strength and tack, high shear, no residuals after peeling-off are required.

TECHNICAL SPECIFICATION

OPERATING GUIDELINES

The material can be applied by slot or roll coating applicators. Suggested operation temperature is 150 – 180℃ for both, depending on machines, substrates, and plant conditions.

FDA STATUS

The product complies with the FDA Indirect Food Contact Regulation of 21 CFR 175.105, “Adhesives”.

STORAGE & SHELF LIFE

The intact packing material can be stored indoor for 24 months, from the date of manufacture, in its original packages under dry and clean conditions at ambient temperature below 35℃ and above 5℃. Direct sunlight and moisture condensation must be prevented.

OPERATING PRECAUTIONS

Do not mix with other adhesives to prevent contamination. The material is applied hot. Appropriate personal protective clothing and eye protection are strongly recommended to prevent burns. Adequate ventilation is suggested to remove any vapors or fumes generated. Rotate stocks and using the oldest stock first.

PRODUCT PHOTOS

Hot Melt Pressure Sensitive Adhesive Glue

Rubber Pressure Sensitive Adhesive Glue

Paper Tape PSA Adhesive Glue

Synthetic Rubber Based Hot Melt Pressure Sensitive Adhesive Glue For Masking Paper Tape Images