Hot Melt Pressure Sensitive Adhesive Glue For Wound Surgical Dressing Making
| Glue type | rubber based hot melt glue |
| Main raw materials | rubber, resin |
| Shape | solid blocks |
| Application condition | slot coating with temperature 135-165C |
DESCRIPTION
The JaourTak this kind glue is a synthetic rubber based hot melt pressure sensitive adhesive specifically developed for
medical tapes, plasters and bandages applications. The product is featured high tack, peel, and shear strength,
and with good ageing performance.
SUGGESTED USES
Medical tapes, plasters and bandages to various substrates.
Other pressure sensitive adhesive applications that high bond strength and tack are required.
OPERATING GUIDES
The material can be applied by slot or roll coating applicators. Suggested operation temperature is 150 – 180 0 C
for both, depending on machines, substrates, and plant conditions.
FDA STATUS
The product complies with the FDA Indirect Food Contact Regulation of 21 CFR 175.105, “Adhesives”.
PACKAGE
6.25kg or 1kg block wrapped with siliconized release paper, 25kg/box.
Please consult the sales representative for special requirements.
STORAGE & SHELF LIFE
The intact packing material can be stored indoor for 24 months, from the date of manufacture, in its original
packages under dry and clean conditions at ambient temperature below 35 0 C and above 5 0 C.
Direct sunlight and moisture condensation must be prevented.
OPERATING PRECAUTIONS
Do not mix with other adhesives to prevent contamination. The material is applied hot. Appropriate personal
protective clothing and eye protection are strongly recommended to prevent burns. Adequate ventilation is
suggested to remove any vapors or fumes generated. Rotate stocks and using the oldest stock first.
Product Tags:
|
|
Hot Melt Pressure Sensitive Adhesive Glue For Wound Surgical Dressing Making Images
|
